Smart Switch

What can the IFREEQ Smart Wall Switch do?

The IFREEQ Smart Wall Switch enables full lighting control of your home by controlling the power (on and off). After paired, you can control remotely through the App and set timed controls. It can also work with other smart devices to achieve more automation.

Can the IFREEQ Smart Wall Switch be connected to Wi-Fi?

The IFREEQ Smart Wall Switch can be directly connected to Wi-Fi. And we have devices based on Zigbee/Bluetooth communication protocol. Kindly communicate with our team for more details.

How do I install the IFREEQ Smart Wall Switch?

Take with neutral double rocker as an example, first cut off the power and make sure the electricity is off. Follow the instructions in the manual to wire using the wiring cap included in the accessories. After making sure that the wiring is correct, turn the power back on and add Wall Switch to your phone.

How do I reset the IFREEQ Smart Wall Switch?

Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold (about 10 seconds) until the Wi-Fi status LED blinks amber rapidly to reset the Smart Switch to factory defaults.

If the external network (e.g. Wi-Fi) is down, can I still use the IFREEQ Smart Wall Switch?

If the external network is disconnected, you will not be able to use the Smartlife app to control the IFREEQ Smart Wall Switch . However, the local controls on the Wall Switch will not be affected.

How do I verify the effective communication distance between the IFREEQ Smart Wall Switch(Zigbee) and the Hub?

For detailed instructions, please refer to the "effective communication distance verification" section in the manual. If the Hub prompts "normal connection confirmed" voice message or other similar messages, it means the smart devices and the Hub are communicating effectively. If there are no prompts, please move the smart devices closer to the Hub and try again.

What do I do if the IFREEQ Smart Wall Switch is offline?(Zigbee)

First, please check if the Wi-Fi network or the power supply for the Hub is working normally. If there are no problems with the network or power supply, please reset the Wall Switch and follow the instructions on how to reconnect the Wall Switch.

How do I choose between the No Neutral Switch or With Neutral Switch?

The main point to consider when choosing between the No Neutral Switch or With Neutral Switch is if there is a neutral line in the switch box. If the box contains a neutral line, it is recommended to use the With Neutral Switch for it is more stable.

Why is the light flashing when using the No Neutral Switch?

Due to design, the No Neutral Smart Wall Switch is not suitable for lights of low power. The minimum power requirement for No Neutral Smart Wall Switch is 3W/way (Incandescent) and 5W/way (CFL/LED). When lights with low power are used, the light may flash occasionally.